Chlorinated polyethylene rubber products have description method

Chlorinated polyethylene rubber products are presented below:

1 extrusion performance is good: the extrusion speed, good appearance, finished smooth, no scorch phenomenon.

2 good weather resistance: under natural conditions after 300h the special rubbertensile strength and fracture rate is smaller.

3 good heat resistance: 100 ℃ with 72 hours of thermal aging test of rubber material, the tensile strength and fracture rate is smaller.

4 good oil resistance: three kinds of oil as the test medium at the end of the trial of 100 ℃ hours, polyethylene rubber volume change rate of chloride is smaller.

Method of use

1, extrusion: the SCM compound directly into the extruder feed opening extrusion can be.

2, vulcanization conditions: 151 ℃ -60min.

3, vulcanization process: autoclave curing, suitable for cloth, sulfide lead process,mold pressing vulcanization.

For a weatherproof and heat resistant requirements of the hose, such as high pressure wire braided hose, rubber hose, cable outer sheath, sealing materials,rubber gasket.